Search results

Solvent‐clean and no‐clean mass reflow processes of 0.4 mm pitch, 28 mm body size, 256‐pin fine pitch quad flat packs (QFPs) are presented. Emphasis is placed on fine pitch parameters such as printed circuit board (PCB) design, solder paste selection, stencil design, printing technology, component placement, mass reflow, cleaning and inspection. Furthermore, cross‐sections of component/PCB assemblies from both processes have been thoroughly studied using scanning electron microscopy (SEM).

Purpose: Entrepreneurship is one of the best ways towards self-sufficiency and poverty alleviation for women in a country without guaranteed employment. The research contributes and provides reasons for supporting women’s entrepreneurship, as although it is well-documented that women’s entrepreneurship increases economic growth, other approaches need attention, especially those related to sustainability.

Need for the study: Women have superior emotional intelligence, resilience, and capacity to maintain a healthy work–life balance; women make better business and entrepreneurial leaders. Many businesses see encouraging women to join the workforce as a key to achieving sustainability goals. This study will provide valuable insights into the role of female entrepreneurs in driving sustainable business practices in the USA and India – rural India and urban India.

Methodology: The chapter adopts a descriptive research design methodology in conducting a thorough literature review on the evolution of women entrepreneurship in India. The case-based approach has been adopted to depict women entrepreneurs and their growth stories. The analysis is based on qualitative analysis of secondary data and primary data. This research proposes exciting revelations regarding the trend of women entrepreneurship in India and, from a global perspective, challenges women entrepreneurs face in organised and unorganised sectors in India and policies in different countries that promote women entrepreneurship towards sustainability.

Findings: Women business owners in India help the economy thrive, reduce poverty, and have a greater chance of shaping India’s destiny. This chapter looks at how entrepreneurial actions affect cultural morals and values. Women’s business growth rates vary from country to country, and this variation is influenced by the fact that countries can be broadly categorised as either developed or developing.

The high prevalence of hypertension is a significant concern worldwide. A decrease in salt intake is a well-known strategy to control hypertension and reduce the risk of cardiovascular diseases. Little is known about the factors influencing salt intake behaviors in settings such as Iran where consumption of salt is higher than the recommended amount. The purpose of this study was to find out what factors affect three salt intake behaviors among women: adding salt when cooking, adding salt to prepared food at the table and purchasing salty foods.

A community-wide cross-sectional survey of 516 women was conducted in Ilam, Iran. Participants were recruited using the cluster random sampling method. The survey included behaviors and variables of an expanded theory of planned behavior. The hypothesized relationships were investigated using structural equation modeling.

Perceived behavioral control (PBC) (p < 0.001) and habit (p = 0.01) appeared to be significant factors of adding salt when cooking. Determinants of adding salt to food at the table were intention (p < 0.001), PBC (p < 0.001), habit (p < 0.001). Also, PBC (p < 0.001), intention (p < 0.001), habit (p < 0.001) were identified as predictors of the purchase of salty foods. The results did not support the moderating role of Hedonic feeling to salt on the relation between intention and behaviors.

This study would be applicable to develop salt reduction interventions. Because altering the hedonic response to food is difficult, the lack of its moderating role could be a promising finding for developing salt reduction interventions.

Health is one of the most basic human rights. Self-medication not only results in many risks, complications and mortalities but also remains a massive economic burden on governments’ pharmaceutical budgets, insurance companies and the general population. The importance of self-medication as one of the worldwide health problems, this paper aims to investigate the extent of this problem and related factors in Sanandaj, Iran in 2018.

This cross-sectional, descriptive study was conducted on 838 people who referred to pharmacies in Sanandaj, Iran in 2018. The subjects were selected in 10 pharmacies, 84 in each, randomly. A self-constructed questionnaire was used to collect information about demographic features, prevalence and reasons for self-medication. The data was analyzed statistically by SPSS software.

The results show a high prevalence of self-medication, 73.70 per cent among people who referred to the pharmacies in Sanandaj during 2018. There was a significant correlation between self-medication and occupation, education level, age groups, chronic disease, smoking or reasons to refer to pharmacies (p < 0.05). Analgesics, antibiotics; non-steroid anti-inflammatory, cold and gastrointestinal medicines were the most commonly used medicines by the subjects. People with headache, cold, infection, stomach pain, toothache and dysmenorrhea were more likely to act self-medication than people with other complaints. Among people who do self-medication, (85.60 per cent) had already experienced satisfactory results after using medicines. Mild symptoms of the disease (74.11 per cent), availability of medicines (72.98 per cent) and easy access to medicine supplies in pharmacies (71.35 per cent) are other reasons for self-medication.

In general, the study had some limitations. One of the limitations was related to the research period i.e. spring and summer. So, it is suggested to conduct studies in other seasons, too. Furthermore, as the time of self-medication was the past three months, there was a probability of recall bias.

The prevalence of self-medication in Sanandaj is high and alarming, implementing educational programs about this issue is extremely required. Health policymakers should take all necessary steps to tackle self-medication efficiently.

This paper aims to experimentally determine the influence of the tool shoulder depth value on the structural and strength properties of the single lap joints made of 7075-T6 aluminium alloy made with friction stir welding (FSW) technology. The aim of the preliminary tests is to optimize the parameters of joining process of thin-walled structures such as the skin-stringer joint or skin-frame joint of the aircraft fuselage. The tests were carried out for materials commonly used in such structures, i.e. 1.6 mm thick sheet 7075–T6 aluminium alloy with cladding on both sides (cladding thickness 4% per each side). The layer of clad protects plates from corrosion.

This study shows the results of the investigation for the joining of 7075–T6 ALCLAD aluminium alloy sheets. The welding process was carried out on a computer numerical control milling machine SOLARUCE TA–20A. Linear FSW welding was performed using a commercial tool from RSS SCHILLING with the symbol 10–K–4–Z–M–O, which is fabricated of hot work tool steel. Constant parameters of the technological process were applied. The welding process was executed for different values of the shoulder depth ZS.

This paper investigated the dependence between the thinning of the welded material and the depth value of the tool shoulder during the FSW process. The influence of the depth value of tool shoulder on joint strength in the static tensile/shear test was also performed. With the increase of the depth of the tool, the size of flash and structures of the face of the joint changes as well (its annular surface resulting from the tool’s work and the accompanying process of material flow on the run-off side). Such conditions in the process require a proper tool depression to reduce the occurrence of flash and minimize material thinning to achieve high joint strength and maintain the conditions for plasticizing the material.

Based on the experimental tests carried out, a number of guidelines for the correct conduct of the welding process can be outlined.

Taking into account the various aspects of the process, the optimal range of the tool depth into the material is a value of approximately 0.06 mm. At this value, the face of the weld is not porous; the flash is easily removed; and the strength of the joint and the deformation of contact line are at an acceptable quality level.

The purpose of this study is to examine the underresearched transformative service research (TSR) and social marketing segment of young adults who use drugs and identify motivators that have been studied in previous literature, using a service ecosystem lens and provide direction for future research into this area. This research provides the evidence-based knowledge for transformative service and social marketing practitioners to design transformative services that target these motivators.

This systematic review, guided by the preferred reporting items for systematic reviews and meta-analysis framework, examines and analyses 207 articles published between 2015 and 2020.

This study identified that young adults are motivated to take drugs to enhance one’s experience, to cope, for social reasons, because of individual characteristics and for other reasons. Research has largely focused on microsystem and mesosystem motivators with data collected mainly using a microsystem approach.

This paper contributes to the TSR and social marketing literature by providing a holistic investigation into all motivators relevant to young adult drug use. An ecosystem classification and theoretical framework of the motivators is curated to help guide future TSR and social marketing research and interventions.

Aggressive behaviors are common among students. Given the importance of education in reducing aggressive behavior, this study aims to examine the influence of a theory of planned behavior (TPB)-based educational intervention on aggression-preventive behaviors in fifth-grade male students in Fasa city, Iran.

A total of 120 male students were randomly picked from several public schools in Fasa city, Iran, between 2018 and 2019. Assessments were completed before and three months after the intervention. Intervention consisted of eight 55–60-min training sessions based on the TPB’s processes and constructs.

Prior to the educational intervention, there was no significant difference between the two groups in terms of attitude, subjective norms, perceived behavioral control, intention to stop aggressiveness or to engage in aggression-preventive activities. However, three months following the intervention, the experimental group demonstrated a considerable rise in the aforementioned constructs (p > 0.001 in all cases).

The study’s findings demonstrated the efficacy of a TPB-based educational intervention on constructs of the TPB theory. Results suggest application of a TPB-based educational intervention can have a pro-social impact on the attitudes and behavior of elementary age boys.

In this article, a novel hybrid composite patch consisting of unidirectional carbon fiber and glass fiber is considered for repair of the aircraft structure. The purpose of this paper is to assess the performance of hybrid composite patch repair of cracked structure and propose an optimized solution to a designer for selection of the appropriate level of a parameter to ensure effective repair solution.

Elastic properties of the hybrid composites are estimated by micromechanical modeling. Performance of hybrid composite patch repair is evaluated by numerical analysis of stress intensity factor (SIF), shear stress, and peel stress. Design of experiment is used to determine responses for a different combination of design parameters. The second-order mathematical model is suggested for SIF and peel stress. Adequacy of the model is checked by ANOVA and used as a fitness function. Multiobjective optimization is carried out with a genetic algorithm to arrive at the optimal solution.

The hybrid composite patch has maintained equilibrium between the SIF reduction and rise of the peel stress. The repair efficiency and repair durability can be ensured by selection of an optimum value of volume fraction of glass fiber, applied stress, and adhesive thickness.

The composite patch with varying stiffness is realized by hybridization with different volume fraction of fibers. Analysis and identification of optimum parameter to reduce the SIF and peel stress for hybrid composite patch repair are presented in this article.

In this article, the author proposed a new analytical solution procedure for 12 order differential equation. The new analytical technique namely homotopy analysis transform method is efficient and effective for solving higher order differential equations. The results indicate the effectiveness and stability of the proposed algorithm. The paper aims to discuss these issues.

The author designed a new solution methodology for higher order differential equations which is a combination of Laplace transformation and homotopy deformation theory.

The author mainly discussed two numerical applications with error analysis of analytical scheme which shows high order accuracy of the projected technique which will serve as a milestone for solving higher order differential equations in engineering with no efforts.

The author proposed an innovative and original idea for nth-order differential equations in this article.

The health belief model (HBM) is the behavioral change theory most widely used in health behavior studies. Several studies have identified the limitations of this model, one of which concerns the validity in predicting behavioral changes. The purpose of this paper, scoping review, is to map the validity of HBM variables in predicting behavioral changes based on available synthesized evidences.

A scoping review was conducted using the Arksey and O’Malley’s framework. PubMed, Health Evidence, Cochrane Database of Systematic Reviews, ScienceDirect and Google Scholar were searched using a combination of keywords: health belief model, review, systematic review and meta-analysis between February 15 and March 18, 2016.

Of the 1,457 articles, 4 met the inclusion criteria. All results showed that HBM variables were consistently related to behaviors and the strength of the correlation were varied. Perceived barriers and perceived benefits were the strongest predictor, while perceived severity was the weakest. The association between HBM variables and behaviors was moderated by some aspects of behavioral outcomes, the study design and the time interval between measurement of the HBM variables and behavior.

Although the four main variables of HBM have been shown to be related to behavior, the overall outcomes are varied and have not demonstrated conclusive evidence during the last ten years. The results of this scoping review imply the need for a systematic review and meta-analysis of the results of recent studies. In addition, more longitudinal studies are needed to ensure the validity of HBM variables by considering any possible moderators.